Description

Versatile circulating water pump for use in aquariums, drainage, oxygen supply, wave acceleration, filtration, and even fountain construction. Can be used both indoors and outdoors. Its housing is made of ABS plastic, stable and strong, there is no need to worry about it being damaged by a colliding stone or fish. It works quietly and does its job reliably, and the motor coil is protected by resin against possible infiltrations. The motor shaft is made of stainless steel so it does not deform and is durable.

This pump must be placed below the water level, do not use it dry. Its protection is IPX8, so you can safely immerse it in water for max. To a depth of 0.5-2.8 meters. Each type has a switch that allows you to adjust the flow rate.

How it works
If used in an aquarium, the drain hose and the air inlet hose must be connected to the appliance and then fixed to the wall of the aquarium using suction cups. Until the device is securely fastened, do not switch on the power supply and unplug the pump even if e.g. cleans the aquarium! The connecting cable on the device must not be replaced or cut!

Availability

HX-800	3 670 Ft
HX-1500	4 340 Ft
HX-2500	5 330 Ft
HX-2000	5 591 Ft
HX-4500	9 990 Ft