Haileaa HX Water Pump

Description

Versatile circulating water pump for use in aquariums, drainage, oxygen supply, wave acceleration, filtration, and even fountain construction. Can be used both indoors and outdoors. Its housing is made of ABS plastic, stable and strong, there is no need to worry about it being damaged by a colliding stone or fish. It works quietly and does its job reliably, and the motor coil is protected by resin against possible infiltrations. The motor shaft is made of stainless steel so it does not deform and is durable.

This pump must be placed below the water level, do not use it dry. Its protection is IPX8, so you can safely immerse it in water for max. To a depth of 0.5-2.8 meters. Each type has a switch that allows you to adjust the flow rate.

How it works
If used in an aquarium, the drain hose and the air inlet hose must be connected to the appliance and then fixed to the wall of the aquarium using suction cups. Until the device is securely fastened, do not switch on the power supply and unplug the pump even if e.g. cleans the aquarium! The connecting cable on the device must not be replaced or cut!

	Voltage	Output		Pressure altitude	Dimensions
HX- 800	110-120V AC 220-240V AC	3 W	285 l / h	0,5 m	55 x 65 x 80 mm
HX-1500	110-120V AC 220-240V AC	5 W	400 l / h	0,7 m	63 x 73 x 83 mm
HX-2000	110-120V AC 220-240V AC	10 W	650 l / h	1 m	90 x 73 x 110mm
HX-2500	110-120V AC 220-240V AC	12 W	650 l / h	1,3 m	112 x 95 x 105 mm
HX-4500	110-120V AC 220-240V AC	36 W	2000 l / h	2,8 m	150 x 135 x 120 mm

The information herein is provided by the manufacturer.
Manufacturers can change product information at any time, without prior notice.
We are not liable for any changes.
All pictures shown are for illustration purpose only. The product may be different in reality.
Our sets may vary due to current stock availabilities. If any changes occur, customers will be informed in time.